GoPro Curved + Flat Adhesive Mounts
GoPro Curved + Flat Adhesive Mounts are the consumer benchmark for quick, low-cost camera attachment to helmets and curved or flat surfaces; their shaped bases and pressure-sensitive adhesives make installs fast and broadly compatible with action-camera accessories. Compared with industrial tapes and mechanical clamps on this list, they trade permanent strength for convenience and low weight, making them the best choice here when ease of use and camera-specific compatibility matter most for the Adhesive and Clamp Mounting Hardware use case.
Curved & flat fit — action-ready
Low-profile hold — stealthy
Curved & flat fit — action-ready
Low-profile hold — stealthy
Review Summary
"Users praise the GoPro curved and flat adhesive mounts for their secure hold and easy, low-profile mounting on helmets and gear, though long-term adhesion can fail on dirty, painted, or oily surfaces and removal can be messy. Overall they are considered reliable for repeated use if surfaces are properly prepped and not exposed to extreme peeling forces."
Waterproof stick — surf-proof
Includes both curved and flat low-profile adhesive bases for mounting on helmets and flat surfaces.
Waterproof stick — surf-proof
Includes both curved and flat low-profile adhesive bases for mounting on helmets and flat surfaces.
Recreational Enjoyment
Skill Development & Mastery
GoPro Curved + Flat Adhesive Mounts are the consumer benchmark for quick, low-cost camera attachment to helmets and curved or flat surfaces; their shaped bases and pressure-sensitive adhesives make installs fast and broadly compatible with action-camera accessories. Compared with industrial tapes and mechanical clamps on this list, they trade permanent strength for convenience and low weight, making them the best choice here when ease of use and camera-specific compatibility matter most for the Adhesive and Clamp Mounting Hardware use case.
Curved & flat fit — action-ready
Low-profile hold — stealthy
Waterproof stick — surf-proof
Includes both curved and flat low-profile adhesive bases for mounting on helmets and flat surfaces.
3M adhesive backing provides strong, vibration-resistant hold for action-camera use.
Curved & flat fit — action-ready
Low-profile hold — stealthy
Waterproof stick — surf-proof
Includes both curved and flat low-profile adhesive bases for mounting on helmets and flat surfaces.
3M adhesive backing provides strong, vibration-resistant hold for action-camera use.
$15-30 CAD
3M VHB Tape 5952
3M VHB Tape 5952 is the market-leading permanent bonding solution, offering industrial-grade shear and peel strength with wide temperature tolerance and long-term durability, which justifies its higher unit cost for load-bearing or vibration-prone applications. Against consumer adhesive mounts and reclosable fasteners listed here, VHB delivers the strongest, lowest-profile permanent joint and often replaces mechanical fasteners where aesthetics and reliable long-term hold are priorities.
Ultra-high grip — industrial hug
Gap-conforming foam — gap eater
Ultra-high grip — industrial hug
Gap-conforming foam — gap eater
Review Summary
"3M VHB Tape 5952 is widely regarded as extremely strong and durable for permanent bonding across many materials, with users noting superior shear strength and weather resistance; the main complaints are that it is effectively permanent, difficult to reposition or remove, and requires careful surface prep. Professionals and DIYers alike rely on it for heavy-duty, long-term mounting applications."
Weatherproof bond — storm-proof
High-strength acrylic foam tape engineered for permanent bonding to metals, glass, and many plastics.
Weatherproof bond — storm-proof
High-strength acrylic foam tape engineered for permanent bonding to metals, glass, and many plastics.
Time-Saving Convenience
Eco-Friendly Living
3M VHB Tape 5952 is the market-leading permanent bonding solution, offering industrial-grade shear and peel strength with wide temperature tolerance and long-term durability, which justifies its higher unit cost for load-bearing or vibration-prone applications. Against consumer adhesive mounts and reclosable fasteners listed here, VHB delivers the strongest, lowest-profile permanent joint and often replaces mechanical fasteners where aesthetics and reliable long-term hold are priorities.
Ultra-high grip — industrial hug
Gap-conforming foam — gap eater
Weatherproof bond — storm-proof
High-strength acrylic foam tape engineered for permanent bonding to metals, glass, and many plastics.
Thin profile with excellent shear and peel resistance for structural and trim applications.
Ultra-high grip — industrial hug
Gap-conforming foam — gap eater
Weatherproof bond — storm-proof
High-strength acrylic foam tape engineered for permanent bonding to metals, glass, and many plastics.
Thin profile with excellent shear and peel resistance for structural and trim applications.
3M Dual Lock SJ3550 Reclosable Fastener
3M Dual Lock SJ3550 Reclosable Fastener provides a reusable, high-strength interlocking mushroom-head fastener that balances holding power with serviceability — you get repeatable attachment/removal without the bulk of hook-and-loop and without permanently bonding like VHB. Compared to the GoPro adhesives it offers greater reusability and shear capacity, and versus mechanical clamps it is lighter and lower profile, making it a cost-effective modular option for medium-duty mounting in this product set.
Snap-close reclose — clicks forever
High-cycle life — repeat champ
Snap-close reclose — clicks forever
High-cycle life — repeat champ
Review Summary
"3M Dual Lock SJ3550 receives high marks for providing a reusable, high-strength snap-fastener that stays secure under vibration and repeated cycles, though some users note that dust, dirt, or edge peeling can reduce performance and proper adhesive backing prep is important. It’s favored where a removable yet robust fastening solution is needed."
Clean peel removal — residue shy
Mushroom-shaped interlocking heads provide a strong, reclosable mechanical attachment.
Clean peel removal — residue shy
Mushroom-shaped interlocking heads provide a strong, reclosable mechanical attachment.
Time-Saving Convenience
Skill Development & Mastery
3M Dual Lock SJ3550 Reclosable Fastener provides a reusable, high-strength interlocking mushroom-head fastener that balances holding power with serviceability — you get repeatable attachment/removal without the bulk of hook-and-loop and without permanently bonding like VHB. Compared to the GoPro adhesives it offers greater reusability and shear capacity, and versus mechanical clamps it is lighter and lower profile, making it a cost-effective modular option for medium-duty mounting in this product set.
Snap-close reclose — clicks forever
High-cycle life — repeat champ
Clean peel removal — residue shy
Mushroom-shaped interlocking heads provide a strong, reclosable mechanical attachment.
Holds substantial shear loads while allowing multiple open/close cycles without residue.
Snap-close reclose — clicks forever
High-cycle life — repeat champ
Clean peel removal — residue shy
Mushroom-shaped interlocking heads provide a strong, reclosable mechanical attachment.
Holds substantial shear loads while allowing multiple open/close cycles without residue.
RAM Tough-Claw Small Clamp Base with 1" Ball (RAP-B-400U)
RAM Tough-Claw Small Clamp Base with 1" Ball (RAP-B-400U) is a rugged mechanical clamp that secures to irregular or thin rails and panels and delivers the full adjustability of RAM’s 1" ball-and-socket ecosystem, making it ideal where repositioning and heavy-duty retention are required. While pricier and bulkier than adhesive options, it outperforms tapes and reclosable fasteners under dynamic loads and in environments where a non-permanent but extremely robust mounting solution is needed for the Adhesive and Clamp Mounting Hardware category.
Clamp-on grip — zero-drill
1-inch ball swivel — gimble-ready
Clamp-on grip — zero-drill
1-inch ball swivel — gimble-ready
Review Summary
"The RAM Tough-Claw Small Clamp Base (RAP-B-400U) is praised for its solid construction, secure clamping on tubes and rails, and versatility for camera and device mounts; some buyers mention size limitations on very thin or irregular rails and that tightening can require effort. Overall it’s seen as a dependable small-clamp mounting solution."
Heavy-duty hold — truck tough
Adjustable clamp design grips round, square, and irregular rails securely using a tightening bolt.
Heavy-duty hold — truck tough
Adjustable clamp design grips round, square, and irregular rails securely using a tightening bolt.
Recreational Enjoyment
Time-Saving Convenience
RAM Tough-Claw Small Clamp Base with 1" Ball (RAP-B-400U) is a rugged mechanical clamp that secures to irregular or thin rails and panels and delivers the full adjustability of RAM’s 1" ball-and-socket ecosystem, making it ideal where repositioning and heavy-duty retention are required. While pricier and bulkier than adhesive options, it outperforms tapes and reclosable fasteners under dynamic loads and in environments where a non-permanent but extremely robust mounting solution is needed for the Adhesive and Clamp Mounting Hardware category.
Clamp-on grip — zero-drill
1-inch ball swivel — gimble-ready
Heavy-duty hold — truck tough
Adjustable clamp design grips round, square, and irregular rails securely using a tightening bolt.
Integrated 1" rubber-coated ball provides standard RAM arm compatibility and vibration damping.
Clamp-on grip — zero-drill
1-inch ball swivel — gimble-ready
Heavy-duty hold — truck tough
Adjustable clamp design grips round, square, and irregular rails securely using a tightening bolt.
Integrated 1" rubber-coated ball provides standard RAM arm compatibility and vibration damping.
RAM U-Bolt Base with 1" Ball (RAM-B-231ZU)
RAM U-Bolt Base with 1" Ball (RAM-B-231ZU) is purpose-built for tubular installations — marine rails, handlebars and roll bars — using a plated U-bolt clamp that provides a secure, vibration-resistant anchor point for RAM’s ball mounts. Compared with adhesive mounts and tapes it offers superior mechanical reliability on round structures, and relative to the Tough-Claw it is the better financial and technical choice when you need a permanent, pipe-specific mounting interface in this use-case set.
U-bolt mount — pipe-hugger
1-inch ball adjust — multi-angle
U-bolt mount — pipe-hugger
1-inch ball adjust — multi-angle
Review Summary
"The RAM U-Bolt Base with 1" Ball (RAM-B-231ZU) is favored for its robust build and dependable mounting to round rails and bars, offering a stable foundation for RAM arms and accessories; a few users note fit issues if the tube diameter doesn’t match standard sizes and that hardware corrosion can occur in harsh marine environments without care. Generally considered reliable and well-made."
Salt-ready finish — marine tough
U-bolt and backing-plate design clamps firmly around round tubes and handrails with included stainless hardware.
Salt-ready finish — marine tough
U-bolt and backing-plate design clamps firmly around round tubes and handrails with included stainless hardware.
Recreational Enjoyment
Time-Saving Convenience
RAM U-Bolt Base with 1" Ball (RAM-B-231ZU) is purpose-built for tubular installations — marine rails, handlebars and roll bars — using a plated U-bolt clamp that provides a secure, vibration-resistant anchor point for RAM’s ball mounts. Compared with adhesive mounts and tapes it offers superior mechanical reliability on round structures, and relative to the Tough-Claw it is the better financial and technical choice when you need a permanent, pipe-specific mounting interface in this use-case set.
U-bolt mount — pipe-hugger
1-inch ball adjust — multi-angle
Salt-ready finish — marine tough
U-bolt and backing-plate design clamps firmly around round tubes and handrails with included stainless hardware.
Features a 1" ball mount for seamless integration with RAM arms and accessory pieces.
U-bolt mount — pipe-hugger
1-inch ball adjust — multi-angle
Salt-ready finish — marine tough
U-bolt and backing-plate design clamps firmly around round tubes and handrails with included stainless hardware.
Features a 1" ball mount for seamless integration with RAM arms and accessory pieces.